Manual Indexable Probe Head For Coordinate Measuring Machines
The TESASTAR-i M8 probe head has the same capabilities as the TESASTAR-i standard model except that the probe is not built-in. It uses an M8 threaded connection which allows it to mount touch-trigger probes/extensions with M8 thread.
In combination with TESASTAR-mp probes, the TESASTAR-i M8 probe head is compatible with the TESASTAR-pr automatic probe changer.
Part No.
- TESASTAR-i M8 (D5P - Ø 9.5 mm): 03939031
| Technical Characteristics | ||
| Angular Rotation | A: 0° to 90°, B: ±180° | |
| Increments | 15° | |
| Total Number of Positions | 168 | |
| Position Repeatability | 1.5 µm | |
| Extensions | M8/M8, Max. Length: 50 mm | |
| Adjustable Trigger Force | 0.1 to 0.3 N | |
| Axis Clamping | Manual, By Two Buttons on the Probe Head | |
Cabling and Shank Configurations
| TESASTAR-i Cabling and Shank Configuration | |||||||
| Cable DIN 5p | M3 Stylus 4by21mm | D20mm shank adapter | Cable DIN-DIN | Cable LEMO | Cable Sub-D 15p | Cable Sub-D 15p-HD | |
| TESASTAR-i | |||||||
| 03939030 | X | X | |||||
| 03939103 | X | X | X | ||||
| TESASTAR-i M8 | |||||||
| 03939031 | X | ||||||